1.4306 (X2CrNi19-11) directly from stock & cut to your required dimensions!
1.4306 is an austenitic chromium-nickel steel with low carbon content and a higher-alloyed version of 1.4307. The slightly elevated chromium and the slightly higher nickel content, 1.4306 is more corrosion resistant than 1.4307.
Main applications: Automotive Industry, Chemical Indstrie, particularly production and storage of nitric acid, Electronic equipment, petroleum industry / petrochemical industry, food industry, mechanical engineering
Machinability: 3 (1 = very bad - 10 = good)
Corrosion class: 3-4 (0 = weak - 5 = good)
flat, forged, solution annealed
The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.
Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.
Do you have any questions?
We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.
Notice: Specifications contained in following data sheet are provided as a description, liability is excluded!
More stainless steel