Stock

1.4435 (X2CrNiMo18-14-3) solution-annealed and quenched

Back to category page

1.4435 (X2CrNiMo18-14-3) directly from stock & cut to your required dimensions!

International identifiers
Scopes

1.4435 is an austenitic stainless chromium-nickel-molybdenum steel with low carbon content. The material 1.4435 is a higher-alloyed version of 1.4404.

It is distinguished by its very good corrosion resistance in natural environmental media (water, rural and urban atmosphere) and is resistant to various acids.
Industrial use in chlorine and salt concentrations.

1.4435 is popularly known as AISI 316L.


It is mainly used in the medical and pharmaceutical industry, chemical industry, petroleum industry, petrochemical industry, for electronic equipment and for manufacturing synthetic fibers.

Characteristics

Weldability:         excellent

Machinability:     4 (1 = bad - 10 = good)

Polishing:            yes

Corrosion class:  4 (0 = weak - 5 = good)

 

Calculate the weight of the required material quickly »

Chemical composition
1.4435
X2CrNiMo18-14-3
CSiMnPSCrMoNiV
min.     17,02,512,5   
max.0,031,02,00,0450,0319,03,513,5   
1.4435
X2CrNiMo18-14-3
AlCuNNbTiSonstiges
min.                  
max.      0,11         
In stock

Flat, forged

Stahlblock
Advantages of saw cut

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.

Do you have any questions?

We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.

Yoseli Gättner

Your contact person Yoseli Gättner+49 (0) 35263-665-19

contact now

Notice: Specifications contained in following data sheet are provided as a description, liability is excluded!

 


More stainless steel

1.4021 1.4057 1.4104 1.4112
1.4122 1.4313 1.4410 1.4418
1.4462 1.4542 17-4PH

All stainless steel cuts