1.4024 (X15Cr13) directly from stock & cut to your required dimensions
Stainless martensitic chromium steel, which is treatable because of the higher C content to higher strength values. Resistant to water and steam.
Main applications: Construction parts which are in contact with water and steam, pump shafts, bolts, valve spindles, piston rods, turbine blades and similar parts.
Weldability: possible under certain conditions
Machinability: 5 (1 = very bad - 10 = good)
Corrosion class: 2 (0 = weak - 5 = good)
Round, forged, quenched and tempered, machined
The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.
Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.
Do you have any questions?
We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.
Your contact person Sarah Spauschus+49 (0) 35263-665-30+49 (0) firstname.lastname@example.org
Notice: Specifications contained in following data sheet are provided as a description, liability is excluded!
More stainless steel