What is 1.2358 (60CrMoV18-5)
Material 1.2358 is an alloyed tool steel characterized by a balanced combination of high toughness, good wear resistance and high strength. Its distinctive properties provide a good combination of load-bearing capacity and dimensional stability. Alternatively for very high carbon steels which have only low toughness such as 1.2080, 1.2436 and the standard tool steel 1.2379.
International identifiers
Properties of the material 1.2358 (60CrMoV18-5)
Properties
- High wear resistance
- Good through-hardening properties
- Very good surface hardenability in the quenched and tempered condition
- High surface hardness combined with good toughness
- Good polishability
- Good weldability
- Also suitable for hot-work applications involving low thermal loads
Calculate the weight quickly and easily
Heat treatment 1.2358
| Temperature in °C | Cooling | Hardness |
|---|---|---|---|
Soft Annealing (+A) | 820–860 | Furnace | max. 240 HB |
| Stress Relief Annealing | 600–650 | Furnace | – |
| Hardening | 950–980 | Oil, pressurized gas (N₂), air or hot bath (500–550 °C) | Approx. 64 HRC after quenching |
Chemical composition of 1.2358
| 60CrMoV18-5 1.2358 | C | Si | Mn | P | S | Cr | Mo | Ni | V |
|---|---|---|---|---|---|---|---|---|---|
| min. | 0,58 | 0,2 | 0,7 | 4,3 | 0,4 | 0,2 | |||
| max. | 0,62 | 0,5 | 0,9 | 0,03 | 0,03 | 4,7 | 0,6 | 0,3 |
Areas of application for 1.2358
Instructions for use
- Suitable for applications requiring high toughness and wear resistance.
- Suitable for high mechanical loads and repeated forming stresses.
- Also suitable for hot-work applications involving low thermal exposure.
Areas of application
- Forming tools and cold-forming tools
- Deep-drawing tools and bending tools
- Plastic moulds
- Cold extrusion tools
- Compression moulding tools and stamping tools
- Segmented cutting tools
- Shear blades
- Hot-work tools for applications involving low thermal exposure
Form of supply and availability of 1.2358
In stock
Immediately available from stock
Form of supply
Flat, forged, quenched and tempered

Sawn blank
The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.
Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.
Frequently asked questions about material 1.2358:
It offers high toughness, good surface hardenability and wear resistance.
Applications include cutting, stamping and forming tools, as well as deep-drawing tools.
It is used in the plastics mould-making industry and the automotive industry, particularly for body panel forming dies.
It is also used in the manufacture of tools such as shear blades and cold extrusion tools.
It offers good weldability, can be nitrided and is suitable for PVD/CVD coatings.
Notice: Specifications contained in following data sheet are provided as a description, liability is excluded!

![[Translate to Englisch:] [Translate to Englisch:]](/fileadmin/user_upload/produkt-fotos/1.2358_Flachstahlzuschnitt.jpg)
![[Translate to Englisch:] [Translate to Englisch:]](/fileadmin/user_upload/produkt-fotos/1.2358_Flachstahlzuschnitt_.jpg)