1.2080 (X210Cr12) Material Data Sheet

Back to category page

1.2080 (X210Cr12) directly from stock & cut to your required dimensions.

International identifiers
AISI D3, T30403, F5212, Z200C12, D3 steel, X205Cr12KU, SKD1, GOST Ch12, NC11, B.S. BD3

The high chromium cold work steel ( X210Cr12 ) has a very good resistance to abrasive and adhesive wear. Very good compressive strength . The toughness properties are moderate. Working hardness 58-64 HRC.

1.2080 is a common tool steel under the ledeburitic 12% chromium steels and is used for the following applications: high-performance blanking dies, punching tools, punch, shear blades, knives Baking & head temple, broaches, drawing tools, drawing dies, ring rolling , wood cutter.


soft-annealed max. 250 HB

Machinability: 4 (1 = badt - 10 = good)


Calculate the weight of the required material quickly »

Chemical composition
min.1,90,10,15  11,0       
In stock

flat, forged, soft-annealed

Advantages of saw cut

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.

Do you have any questions?

We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.

Andreas Blachowiak

Your contact person Andreas Blachowiak+49 (0) 35263-665-37

contact now

Notice: Specifications contained in following data sheet are provided as a description, liability is excluded!