1.2436 (X210CrW12) Material Data Sheet

Back to category page

1.2436 (X210CrW12) directly from stock & cut to your required dimensions!

International identifiers

Ledeburitic 12% chromium steel, with wolfram addition (therefore better hardenability) highest wear resistance, good dimensional stability, high compressive strength, with a good toughness.

Roll- or table knives, drawing punch, straightening rolls, blanking dies in the paper- and plastic industry, molds in the ceramics industry, cold shear blades for thin sheets up to 2 mm thickness.


annealed max. 250 HB

Machinability: 3 (1 = very bad - 10 = good)


Calculate the weight of the required material quickly »

Chemical composition
min.2,00,10,3  11,0       
max.2,30,40,6  13,0       
min.               0,6
max.               0,8
In stock

Round, forged, annealed

Advantages of saw cut

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.

Do you have any questions?

We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.

Andreas Blachowiak

Your contact person Andreas Blachowiak+49 (0) 35263-665-37

contact now

Notice: Specifications contained in following data sheet are provided as a description, liability is excluded!