1.6565 (40NiCrMo6) directly from stock & cut to your required dimensions!
Material 1.6565 is used for highly stressed components in mechanical engineering, vehicle construction as well as aerospace industry.
1.6565 - only limited welding is possible
machinability: 5 (1 = low - 10 = good)
Flat, forged, annealed
The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.
Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.
Do you have any questions?
We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.
Your contact person Sarah Spauschus+49 (0) 35263-665-30+49 (0) email@example.com
Notice: Specifications contained in following data sheet are provided as a description, liability is excluded!
Back to category page