Stock
Back to category page

1.7147 (20MnCr5) | 1.7149 (20MnCrS5) directly from stock & cut to your required dimensions!

International identifiers
AFNOR 20MC5, 20HG, AISI 5120H
Scopes

20MnCr5 is a hardened steel, which is used primarily in mechanical engineering where it is exposed to high wear. Gearbox parts, camshafts and piston pins are made of it.

Characteristics
Chemical composition
20MnCr5
1.7147
CSiMnPSCrMoNiV
min.0,17 1,00  1,00      
max.0,220,401,400,0250,0351,30       
In stock

plates, rolled, normalized

Stahlblech
Advantages of saw cut

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.

Do you have any questions?

We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.

Andreas Blachowiak

Your contact person Andreas Blachowiak+49 (0) 35263-665-37+49 (0) 35263-665-35

contact now

Notice: Specifications contained in following data sheet are provided as a description, liability is excluded!