1.2365 (32CrMoV12-28) directly from stock & cut to your required dimensions!
![[Translate to Englisch:]](/fileadmin/user_upload/produkt-fotos/1.2365_Flachstahl_Zuschnitt.jpg "[Translate to Englisch:]")
![[Translate to Englisch:]](/fileadmin/user_upload/produkt-fotos/1.2365_Flachstahl_gesaegt.jpg "[Translate to Englisch:]")
Hot work steel with high heat resistance and tempering resistance, as well as high toughness. Good air hardening, good thermal conductivity and water-cooled.
Main fields of application: die-cast brass, brass die-castings, die-casting molds, plastic molds, hot shear knives.
Annealed max. 229 HB
Machinability: 6 (1 = bad - 10 = good)
| 1.2365 32CrMoV12-28 | C | Si | Mn | P | S | Cr | Mo | Ni | V |
|---|---|---|---|---|---|---|---|---|---|
| min. | 0,28 | 0,10 | 0,15 | 2,70 | 2,50 | 0,40 | |||
| max. | 0,34 | 0,40 | 0,45 | 0,03 | 0,02 | 3,20 | 3,00 | 0,70 |
Flat, forged, soft annealed
The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.
Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling. So it is not necessary to anneal the material or make a similar operation beforehand.
Do you have any questions?
We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.
Your contact person Andreas Blachowiak+49 (0) 35263-665-37blachowiak@stahlportal.com
Notice: Specifications contained in following data sheet are provided as a description, liability is excluded!