Stock
Back to category page

1.2344 ESR (X40CrMoV5-1) directly from stock & cut to your required dimensions.

International identifiers
AISI H13, WCLV
Scopes

The hot work tool steel 1.2344 ESR has an improved material property due to the Electro-slag Remelting Process (ESU). Our ESR material is used when better material purity, particularly high tensile strength and compressive strength are required. Compared to the steel 1.2343 ESR, this material has a higher carbon content and is much harder and more wear-resistant. The material 1.2344 ESR is given a good tensile strength and toughness by the soft annealing.

For forging dies, forging tools, hot shear blades, hot extrusion tools, punches, screw tools, steel bolts and ejector.

Characteristics

annealed max. 229 HB

Weldability: bad

Machinability: 5 (1 = very bad - 10 = good)

 

Calculate the weight of the required material quickly »

Chemical composition
1.2344 ESR
X40CrMoV5-1
CSiMnPSCrMoNiV
min.0,350,80,25  4,81,2   0,85
max.0,421,20,5  5,51,5   1,15
In stock

Flat, forged, annealed

Stahlblock
Advantages of saw cut

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.

Do you have any questions?

We are happy to answer your questions and make you an offer for these and other materials. Contact us now for more information.

Andreas Blachowiak

Your contact person Andreas Blachowiak+49 (0) 35263-665-37+49 (0) 35263-665-35

contact now

Notice: Specifications contained in following data sheet are provided as a description, liability is excluded!