germanenglishfrenchspainczechpolish
1.2767_gesaegter_zuschnitt gesaegter zuschnitt_1.2767_Flach_ geschmiedet

1.2767 (45NiCrMo16 | X45NiCrMo4)

1.2767 (45NiCrMo16 | X45NiCrMo4) directly from stock & cut to your required dimensions.

International term:

45NiCrMo16 / X45NiCrMo4 / AFNOR 435 NCD 5

Application field:

The nickel cold steel ( 45NiCrMo16 ) has a high strength, good hardenability and high impact strength and compressive strength . Working hardness 52-55 HRC . Well polishable and erodible.

The tool steel 1.2767 is suitable for the following applications : cutlery dies , embossing dies , solid embossing matrixes (shims) and stamps, bending tools, pressure pads on press brakes, shear blades for thick sliced, plastic molds, reinforcements.

Characteristics:

soft-annealed max. 262

Machinability: 4 (1 = bad - 10 = good)

Chemical composition:

1.2767
45NiCrMo16
X45NiCrMo4
CSiMnPSCrMoNiV
min. 0,4 0,1 0,15     1,2 0,15 3,8    
max. 0,5 0,4 0,45 0,025 0,02 1,5 0,35 4,3 0,15

 

1.2767
45NiCrMo16
X45NiCrMo4
AlCuNNbTiW
min.                        
max. 0,03 0,25             0,15
The chemical composition please take out of the print version.

From stock:

flat, forged, soft-annealed

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.