germanenglishfrenchspainczechpolish
gesaegter_zuschnitt_1.2510_Flach_geschmiedet

1.2510 (100MnCrW4)

1.2510 (100MnCrW4) directly from stock & cut to your required dimensions!

International term:

AISI 01

Application field:

Cold work tool steel, most commonly used tool steel. Curable. High hardenability, high dimensional stability, good edge-holding property and toughness. Working hardness 57-62 HRC

Cuts &. Stamping tools, (up to 6 mm sheet thickness) shear blades, threading tools, thread dies, plastic molds, machine knives, woodworking tools, devices, guide bars, dies, gauges, inserts in mold industry.

Characteristics:

soft-annealed max. 229 HB

Machinability:   5 (1 = bad - 10 = good)

Weldability:        bad

Corrosion class: 1 (0 = low - 5 = good

Chemical composition:

1.2510
100MnCrW4
CSiMnPSCrMoNiV
min. 0,90 0,15 1,0     0,5       0,05
max. 1,05 0,35 1,2 0,035 0,035 0,7       0,15

 

42CrMo4
1.7225
AlCuNNbTiW
min.                     0,5
max.                     0,7
The chemical composition please take out of the print version.

From stock:

flat, forged, soft-annelaed

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.