germanenglishfrenchspainczechpolish
1.2379_flach_gesaegte_zuschnitte gesaegte-zuschnitte_1.2379_Rundstahl_geschmiedet_vorgedreht gesaegte_zuschnitte_1.2379_flach_geschmiedet

1.2379 ( X153CrMoV12)

1.2379 ( X153CrMoV12) directly from stock & cut to your required dimensions!

International term:

AISI D2

Application field:

Ledeburitic cold working steel with high wear resistance and good edge retention, high resistance to abrasive and adhesive wear, high compressive strength.

bending tools, plastic molds during the processing abrasive polymers, machine knives, cold shear blades, cold extrusion tools, thread rolling dies, thread rolling, deep drawing tools, cutting and punching tools, milling cutters

Characteristics:

annealed max. 255 HB

Weldability:      bad

Machinability:  2 (1 = very bad - 10 = good)

Polishability:    yes

Corrosion class:   1 (0 = weak - 5 = good)

Chemical composition:

1.2379
X153CrMoV12
CSiMnPSCrMoNiV
min. 1,45 0,10 0,20     11,0 0,7     0,7
max. 1,60 0,60 0,60 0,03 0,03 13,0 1,0     1,0
Die chemische Analyse entnehmen Sie bitte der Druckversion.

From stock:

Flat, forged, annealed
Round, forged, annealed

Symbol_Block_transparentsymbol_rund_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.