germanenglishfrenchspainczechpolish
1.2343_flach_gesaegter_zuschnitt gesaegter_zuschnitt_1.2343_Rund_geschmiedt_vorgedreht gesaegter-zuschnitt_1.2343_Flach_geschmiedet

1.2343 (X37CrMoV5-1)

1.2343 (X37CrMoV5-1) directly from stock & cut to your required dimensions!

International term:

AISI H11

Application field:

Hot work tool steel with high temperature strength and wear resistance with high thermal shock resistance.
Plastic molds, die-casting and extrusion tools for light metal. Good toughness and thermal conductivity.

For forging dies, forging tools, hot shear blades, hot extrusion tools, punches, screw tools, steel pins and ejector.

Characteristics:

annealed max. 229 HB

Weldability:      bad

Machinability:   5 (1 = very bad - 10 = good)

Chemical composition:

1.2343
X37CrMoV5-1
CSiMnPSCrMoNiV
min. 0,33 0,8 0,25     4,8 1,1     0,3
max. 0,41 1,2 0,50     5,5 1,5     0,5
Die chemische Analyse entnehmen Sie bitte der Druckversion.

From stock:

Flat, forged, annealed
Round, forged, annealed

Symbol_Block_transparentsymbol_rund_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.