germanenglishfrenchspainczechpolish
1.2312_gesaegter_zuschnitt gesaegter_zuschnitt_1.2312_flach_geschmiedet

1.2312 (40CrMnMoS8-6) quenched and tempered 280 - 325 HB

1.2312 (40CrMnMoS8-6) directly from stock & cut to your required dimensions!

International term:

AISI P20 + S

Application field:

Standard plastic mold steel to cross-sections up to 400 mm for plastic- and die casting-molds with medium dimensions. With Sulphur additive for a better machinability.
Mold frame, IHU Tools

Characteristics:

Weldability:      bad

Machinability:  
5 (1 = very bad - 10 = good)

Polishability:    
not suitable

Graining suitability:   
not suitable

Chemical composition:

1.2312
40CrMnMoS8-6
CSiMnPSCrMoNiV
min. 0,35   1,4   0,05 1,4 0,15        
max. 0,45   1,6   0,10 2,0 0,25        
Die chemische Analyse entnehmen Sie bitte der Druckversion.

From stock:

Flat, forged, quenched and tempered

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.