germanenglishfrenchspainczechpolish
1.2080_flach_gesaegter_zuschnitt gesaegter-zuschnitt_1.2080_Flach_geschmiedet

1.2080 (X210Cr12)

1.2080 (X210Cr12) directly from stock & cut to your required dimensions.

International term:

AISI D3 / T30403 / F5212 / Z200C12 / D3 steel / X205Cr12KU / SKD1 / Ch12

Application field:

The high chromium cold work steel ( X210Cr12 ) has a very good resistance to abrasive and adhesive wear . Very good compressive strength . The toughness properties are moderate . Working hardness 58-64 HRC .

1.2080 is a common tool steel under the ledeburitic 12 % chromium steels and is used for the following applications : high-performance blanking dies , punching tools , punch , shear blades , knives Baking & head temple , broaches , drawing tools , drawing dies , ring rolling , wood cutter .

Characteristics:

soft-annealed max. 250 HB

Machinability: 4 (1 = badt - 10 = good)

Chemical composition:

1.2080
X210Cr12
CSiMnPSCrMoNiV
min. 1,9 0,1 0,15     11,0          
max. 2,2 0,4 0,45 0,03 0,03 12,0          
The chemical composition please take out of the print version.

From stock:

flat, forged, soft-annealed

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.