germanenglishfrenchspainczechpolish
10CrMo9-10_1.7380_gesägter_Zuschnitt gesaegter_zuschnitt_1.7380-blech_gewalzt gesaegter_zuschnitt_1.7380-flach_geschmiedet

1.7380  (10CrMo9-10)

1.7380  (10CrMo9-10) directly from stock & cut to your required dimensions!

International term:

ASTM A182F22
AISI K21390
AFNOR 12CD9-10
SS7380

Application field:

10CrMo9-10 is a heat-resistant special structural steel. It is mainly used in boiler and apparatus construction for boiler drums and pressure vessels. The material is suitable for temperatures up to 550°C.

Characteristics:

10CrMo9-10 can be readily welded. It is recommended to preheat up to 200°C.

Chemical composition:

10CrMo9-10
1.7380
CSiMnPSCrMoNiV
min. 0,08     0,40       2,0    0,9                   
max. 0,14 0,50 0,80 0,02 0,01 2,5 1,1        

 

10CrMo9-10
1.7380
AlCuNNbTiSonstiges
min.                        
max.            0,30 0,012                                           
The chemical composition please take out of the print version.

From stock:

plates, rolled, normalized and tempered
flat, forged, quenched and tempered

symbol_blech_transparentSymbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.