germanenglishfrenchspainczechpolish
13CrMo4-5_1.7335_gesägter_Zuschnitt gesaegter_zuschnitt_1.7335_blech_gewalzt gesaegter_zuschnitt_1.7335_flach_geschmiedet gesaegter_zuschnitt_1.7335_rund_geschmiedet

1.7335 (13CrMo4-5)

1.7335 (13CrMo4-5) directly from stock & cut to your required dimensions!

International term:

ASTM A182, A182(F12), A30122, SS7335
STPA20, STBA20, STFA22

Application field:

13CrMo4-5 is a heat-resistant special structural steel . It is mainly used in boiler and apparatus construction. The material is suitable for temperatures up to 550°C.

Characteristics:

13CrMo4-5 can be welded without problems. There is no special heat treatment required.

Chemical composition:

13CrMo4-5
1.7335
CSiMnPSCrMoNiV
min. 0,08     0,40     0,70 0,40        
max. 0,18 0,35 1,00 0,025 0,01 1,15 0,60        

 

13CrMo4-5
1.7335
AlCuNNbTiSonstiges
min.                        
max.        0,30  0,012              
The chemical composition please take out of the print version.

From stock:

plates, rolled, normalized and tempered
flat, forged, quenched and tempered
round bars, forged, quenched and tempered

symbol_blech_transparentSymbol_Block_transparentsymbol_rund_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.