germanenglishfrenchspainczechpolish
1.4539_flach_gesaegter_zuschnitt gesaegter_zuschnitt_1.4539_flach_geschmiedet

1.4539 (X1NiCrMoCu25-20-5)

1.4539 (X1NiCrMoCu25-20-5) directly from stock & cut to your required dimensions!

International term:

AISI 904L, AFNOR Z2NCDU25-20, SIS 2562, SS2562

Application field:

1.4539 is a stainless super austenitic nickel-chromium-molybdenum-copper steel, resistant to various organic and inorganic acids. Areas of application are the construction industry, the chemical and medical industries.

Characteristics:

Weldability:      good

Wachinability:  
5 (1 = bad - 10 = good)

Corrosion class:   5 (0 = weak - 5 = good)

Chemical composition:

1.4539
X1NiCrMoCu25-20-5
CSiMnPSCrMoNiV
min.           19,0 4,0 24,0    
max. 0,02         21,0 5,0 26,0    

 

1.4539
X1NiCrMoCu25-20-5
AlCuNNbTiSonstiges
min.     1,2                
max.     2,0                 
The chemical composition please take out of the print version.

From stock:

flat, forged, quenched and tempered, pre-machined

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.