germanenglishfrenchspainczechpolish
1.4410_flach_gesaegter_zuschnitt 1.4410_flach_gesaegter_zuschnitt_2 gesaegter_zuschnitt_1.4410_flach_geschmiedet_vergütet

1.4410 (X2CrNiMoN25-7-4)

1.4410 (X2CrNiMoN25-7-4) directly from stock & cut to your required dimensions!

International term:

ASTM A182 F53 / A276 / S32750 / SS2328 / SAF 2507

Application field:

1.4410 is a corrosion resistant austenitic-ferritic (duplex) steel. 

Chemical composition:

1.4410
X2CrNiMoN25-7-4
CSiMnPSCrMoNiV
min.           24 3,0 6,0    
max. 0,003 0,8 1,2 0,035 0,015 26 4,5 8,0    

 

42CrMo4
1.7225
AlCuNNbTiSonstiges
min.         0,24            
max.     0,5 0,35            
The chemical composition please take out of the print version.

From stock:

flat, forged, solution annealed, pre-machined

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.