germanenglishfrenchspainczechpolish
1.4313_flach_gesaegter_zuschnitt 1.4313_rund_gesaegter_zuschnitt gesaegte_zuschnitte_1.4313_rund_geschmiedet gesaegte_zuschnitte_1.4313_flach_geschmiedet

1.4313 (X3CrNiMo13-4)

1.4313 (X3CrNiMo13-4) EU material directly from stock & cut to your required dimensions!

International term:

F6NM / C54868 / S41500 / AISI CA 6-NM / SGS6X / SGS5 / ASTMA182 / F6NM430F / SS2385

Application field:

1.4313 is a corrosion and acid resistant softmartensitic chrome-nickel steel with molybdenum addition. Very good strength and toughness properties.

Main applications are in the petroleum industry, for components in power plants and turbinewheels.

Characteristics:

Weldability:      bad

Machinability:   5 (1 = very bad - 10 = good)

Polishability:    yes

Corrosion class:   2 (0 = weak - 5 = good)

Chemical composition:

1.4313
X3CrNiMo13-4
CSiMnPSCrMoNiV
min.           12,0 0,4 3,5    
max. 0,05 0,6 1,0 0,035 0,02 14,0 0,7 4,5    

 

1.4313
X3CrNiMo13-4
AlCuNNbTiSonstiges
min.         0,02            
max.                        
The chemical composition please take out of the print version.

From stock:

round, rolled / forged, quenched and tempered, machined oder peeled surface
flat, forged, quenched and tempered, pre-machined

Symbol_Block_transparentsymbol_rund_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.