germanenglishfrenchspainczechpolish
1.4306_flach_gesaegter_zuschnitt gesaegter_zuschnitt_1.4306_flach_geschmiedet

1.4306 X2CrNi19-11

1.4306 (X2CrNi19-11) directly from stock & cut to your required dimensions!

International term:

AISI304L / UNSS30403 / BS304S11 / JISSUS304L / AFNORZ3CN19-11 / SS2333  

Application field:

1.4306 is an austenitic chromium-nickel steel with low carbon content and a higher-alloyed version of 1.4307. The slightly elevated chromium and the slightly higher nickel content, 1.4306 is more corrosion resistant than 1.4307.

Main applications: Automotive Industry, Chemical Indstrie, particularly production and storage of nitric acid, Electronic equipment, petroleum industry / petrochemical industry, food industry, mechanical engineering

Characteristics:

Weldability:      excellent

Machinability:  3 (1 = very bad - 10 = good)

Polishability:    yes

Corrosion class: 3-4 (0 = weak - 5 = good)

Chemical composition:

1.4306
X2CrNi19-11
CSiMnPSCrMoNiV
min.           18,0   10,0    
max. 0,03         20,0   12,0    
The chemical composition please take out of the print version..

From stock:

flat, forged, solution annealed

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.