germanenglishfrenchspainczechpolish
1.4104_flach_gesaegter_Zuschnitt 1.4104_gesaegter_zuschnitt_rund gesägter_Zuschnitt_1.4104_rund_geschmiedet gesägter_Zuschnitt_1.4104_rund_geschmiedet

1.4104 (X14CrMoS17)

1.4104 (X14CrMoS17) directly from stock & cut to your required dimensions!

International term:

AISI430F / STS430F / SUS430F / S11714 / SIS2383

Application field:

1.4104 is a corrosion and acid resistant martensitic chromium steel with sulfur additive. Sulfur improves the machinability. However the corrosion resistance, in spite of high chromium content, is reduced by the sulfur.This is particularly noticeable in media which cause pitting or crevice corrosion.

Main applications for this material in the automotive industry, hydraulics and as parts for water and steam constructions. 

Characteristics:

Weldability:         bad

Machinability:      7 (1 = very bad - 10 = good)

Polishability:        no

Corrosion class:  2 (0 = weak - 5 = good)

Chemical composition:

1.4104
X14CrMoS17
CSiMnPSCrMoNiV
min. 0,10       0,15 15,5 0,20        
max. 0,17 1,0 1,5 0,04 0,35 17,5 0,60        
The chemical composition please take out of the print version.

From stock:

round, forged, quenched and tempered, machined
flat, forged, quenched and tempered

Symbol_Block_transparentsymbol_rund_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting. Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.