germanenglishfrenchspainczechpolish
1.4024_rund_gesaegter_zuschnitt gesaegter_zuschnitt_1.4024_rund

1.4024 (X15Cr13)

1.4024 (X15Cr13) directly from stock & cut to your required dimensions

Internationale Bezeichnung:

AISI410-420 / UNSS41000-S42000 / JISSUS403 / AFNORZ12C13

Application field:

Stainless martensitic chromium steel, which is treatable because of the higher C content to higher strength values. Resistant to water and steam.

Main applications: Construction parts which are in contact with water and steam, pump shafts, bolts, valve spindles, piston rods, turbine blades and similar parts.

Characteristics:

Weldability:       possible under certain conditions

Machinability:   5 (1 = very bad - 10 = good)

Polishability:     yes

Corrosion class: 2 (0 = weak - 5 = good)

Chemical composition:

1.4024
X15Cr13
CSiMnPSCrMoNiV
min. 0,12 1,0 1,0 0,04 0,03 12,0          
max. 0,17         14,0          
The chemical composition please take out of the print version.

From stock:

Round, forged, quenched and tempered, machined

symbol_rund_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.