1.4006_flach-gesaegter_zuschnitt gesägter_Zuschnitt_1.4006_flach_geschmiedet

1.4006 (X12Cr13) quenched and tempered QT 650

1.4006 (X12Cr13) directly from stock & cut to your required dimensions!

International term:

AISI410 / STS410 / SUS410 / S40310 / S41001 / SS2302

Application field:

1.4006 is a stainless martensitic stainless steel with good corrosion resistance in moderately corrosive , chloride-free media , such as organic acids , soaps and solvents . For optimum corrosion resistance , a polished surface is required .

Main application in mechanical engineering , petroleum and petrochemical industries.


Weldability:         good

Machinability:      5 (1 = very bad - 10 = good)

Polishability:        yes

Corrosion class:  1 (0 = weak - 5 = good)

Chemical composition:

min. 0,08         11,5          
max. 0,15 1,0 1,5 0,04 0,02 13,5       0,75
The chemical composition please take out of the print version.

From stock:

Flat, forged, quenched and tempered


Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting. Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.