germanenglishfrenchspainczechpolish
1.6565_flach_gesaegter_zuschnitt gesaegte_zuschnitte_1.6565_flach_geschmiedet

1.6565 (40NiCrMo6)

1.6565 (40NiCrMo6) directly from stock & cut to your required dimensions!

International term:

AISI 4340

Application field:

Material 1.6565 is used for highly stressed components in mechanical engineering, vehicle construction as well as aerospace industry.

Characteristics:

1.6565 - only limited welding is possible

machinability: 5 (1 = low - 10 = good)

Chemical composition:

1.6565
40NiCrMo6
CSiMnPSCrMoNiV
min.                      
max. 0,43 0,31 0,88 0,011 0,008 1,04 0,68 1,23 0,087
The chemical composition please take out of the print version.

From stock:

Flat, forged, quenched and tempered

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.