germanenglishfrenchspainczechpolish
1.8159_flach_gesaegter_zuschnitt gesaegter_zuschnitt_1.8159_flach_geschmiedet

1.8159 (51CrV4)

1.8159 (51CrV4) directly from stock & cut to your required dimensions!

International term:

AISI 6150, SS2230
AFNOR 50CrV4RR

Application field:

1.8159 is used for highly wear-resistant and through-hardening units. Mainly in automotive engineering and  mechanical engineering .

Characteristics:

annealed

Weldability: bad

Chemical composition:

1.8159
51CrV4
CSiMnPSCrMoNiV
min. 0,47   0,4     2,3       0,10
max. 0,55 0,4 0,7     2,7       0,25
Die chemische Analyse entnehmen Sie bitte der Druckversion.

From stock:

Flat, forged, annealed

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.