germanenglishfrenchspainczechpolish
C60_1.0601_gesägter_Zuschnitt gesaegter_zuschnitt_C60-Blech-gewalzt

1.0601 (C60) | 1.1221 (C60E)

1.0601 (C60) | 1.1221 (C60E) directly from stock & cut to your required dimensions!

International term:

AFNOR C60, AF70C55, 1C60
BS C60, 60CS, 060A62

Application field:

C60 is an unalloyed structural steel . It is used for parts of mechanical and vehicle engineering.

Characteristics:

C60 is difficult to weld and is not suitable for welded structures . As a rule, the material should be preheated to 250 ° C to be error-free welded .

Chemical composition:

1.0601 C60
1.1221 C60E
CSiMnPSCrMoNiV
C60    min.
C60E min.
0,57
0,57
  0,6
0,6
                 
C60    max.
C60E max.
0,65
0,65
0,4
0,4
0,9
0,9
0,045
0,030
0,045
0,035
0,4
0,4
0,1
0,1
0,4
0,4 
   

 

1.0601 C60
1.1221 C60E
AlCuNNbTiSonstiges
C60    min.
C60E min.
                                           
C60    max.
C60E max.
                    Cr+Mo+Ni max. 0,63
Cr+Mo+Ni max. 0,63  
The chemical composition please take out of the print version.

From stock:

plates, rolled, normalized

symbol_blech_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.