germanenglishfrenchspainczechpolish
1.4841_flach_gesaegter_zuschnitt gesaegte_zuschnitte_1.4841_flach_geschmiedet gesaegte_zuschnitte_1.4841_flach_geschmiedet_hk

1.4841 (X15CrNiSi25-21) solution- annealed and quenched

1.4841 (X15CrNiSi25-21) directly from stock & cut to your required dimensions!

International term:

AISI 314
AFNOR Z15CNS25-20

Application field:

1.4841 is a heat-resistant austenitic chrome-nickel steel.
It is scale oxide resistant up to 1100 ° C, has a very good corrosion resistance and due to the higher chromium and nickel content, it has a good heat resistance.
This material is often used for its good hardness and mechanical properties even at high temperatures.

It is mainly used in apparatus construction for high temperature applications, in the chemical industry, in mechanical engineering, in the petroleum industry, in furnace construction and to manufacture chains for the cement industry.

Characteristics:

Weldability: good

Machinability: 7 (1 = bad - 10 = good)

Corrosion class: 3 (0 = weak - 5 = good)

Chemical composition:

1.4841
X15CrNiSi25-21
CSiMnPSCrMoNiV
min.   1,5       24   19       
max. 0,2 2,5 2,0 0,045 0,015 26    22      

 

1.4841
X15CrNiSi25-21
AlCuNNbTiSonstiges
min.                        
max.         0,11               
The chemical composition please take out of the print version.

From stock:

Flat, forged, quenched and tempered

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.