germanenglishfrenchspainczechpolish
1.4713_flach_gesägter_Zuschnitt gesaegte_zuschnitte_1.4713_flach_geschmiedet

1.4713 (X10CrAlSi7) soft annealed

1.4713 (X10CrAlSi7) directly from stock & cut to your required dimensions!

Application field:

1.4713 is a ferritic heat-resistant chromium-nickel steel with aluminum addition.
He is hot corrosion resistant up to 800 ° C , resistant to oxidizing gases containing sulfur and also resistant to carburization.

It is a ferritic steel with only low corrosion resistance, due to the low Cr content.
It is mainly used in furnace construction, for high temperature apparatus-applications, automotive industry and to manufacture chains for the cement industry.

Characteristics:

Weldability:         conditioned

Machinability:     
5 (1 = bad - 10 = good)

Corrosion class: 
1 (0 = weak - 5 = good)

Chemical composition:

1.4713
X10CrAISi7
CSiMnPSCrMoNiV
min.   0,5       6,0          
max. 0,12 1,0 1,0 0,04 0,015 8,0          

 

1.4713
X10CrAISi7
AlCuNNbTiSonstiges
min. 0,5                    
max. 1,0                    
The chemical composition please take out of the print version.

From stock:

Flat, forged, quenched and tempered

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.
This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.