germanenglishfrenchspainczechpolish
1.5752_flach_gesaegter_zuschnitt gesaegter_zuschnitt_1.5752_flach_geschmiedet

1.5752 (15NiCr13/14NiCr14)

1.5752 (15NiCr13/14NiCr14) directly from stock & cut to your required dimensions!

International term:

AISI 3310
AFNOR 10NC12

Application field:

This material is mainly used for highly stressed parts in  tooling and mechanical industry, aircraft as well as components for automotive and transmission manufacturing.

Characteristics:

soft-annelaed

Machinability: 5 (1 = low - 10 = good)

Weldability: yes

Polisshabilityt: yes

Chemical composition:

1.5752
15NiCr13
14NiCr14
CSiMnPSCrMoNiV
min. 0,14   0,4     0,6   3,0    
max. 0,20 0,4 0,7 0,035 0,04 0,9   3,5    
The chemical composition please take out of the print version.

From stock:

flat, forged, quneched and tempered

Symbol_Block_transparent

Benefit of sawn cuts:

The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting.

Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material.

This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.